Bath Buddy, a white plastic drum with a scalloped rim, standing beside a freestanding tub in a green-tiled bathroom

How to Stop Bath Toys Getting Moldy: It's Drainage

Where the trouble starts

Bath's over. The toys are wet, the tub is draining, and you've got about thirty seconds to decide where those toys go. Most people grab a bag or a bucket, toss everything in, and walk away.

That moment decides a lot. Mold needs water that stays put. A dry surface gives it very little to work with. A toy sitting in a puddle overnight gives it plenty.

So the question of how to stop bath toys getting moldy comes down to one thing: where does the water go after bath time?

Think about what happens when you drop wet toys into a container. The water runs off them. It runs down. Then it reaches the bottom and stops, and the toys rest right in it. By morning the toys are still wet, the container is still wet, and the only thing that changed is the clock.

That is what we mean by toys sitting in their own water. It's the whole problem, stated plainly.

Why bags and buckets keep falling short

Back in 2018, we went looking for a way to keep bath toys off the tub floor. What we found was mesh bags and buckets.

The mesh bags grew mold. That's what happens when you hang wet toys in a sack that never dries out. The buckets stayed drier, but they looked like something you'd keep under the sink, not something you'd leave out in your bathroom.

Neither one answers the real question. A bag holds the water against the toys. A bucket holds the water under the toys. In both cases the water has nowhere to go, so it stays.

We spent two years designing our own answer. We started Tiipi in 2020 with one product and one job: stop bath toys sitting in their own water.

The fix isn't a coating or a spray. It's the shape.

Bath Buddy beside a filled tub in a green-tiled bathroom, an adult arm holding four small colored silicone toys above the water

What drainage changes

Drainage moves the water away from the toys. That's all it does, and it's enough.

When water leaves the toys and collects somewhere else, the toys aren't left sitting wet. That's what keeps mold from getting a start. You aren't fighting mold with scrubbing or sprays. You're taking away the thing it needs.

Here's what changes in practice:

  • The toys sit above the water. They aren't resting in a puddle.
  • The water has a place to go. It collects in one spot you can see and empty.
  • Cleanup gets short. Dumping a tray takes a few seconds. Scrubbing a slimy bucket does not.

Wet toys go in. Water drains out. Bath's over.

Bath Buddy, an off-white plastic drum with a scalloped rim and a relief shape on the front, on a base tray against a black background

How the Bath Buddy does it

The Bath Buddy is two pieces that click together. Gravity does the rest.

The basket where the toys sit dips toward the middle. Water runs down into the tray underneath, and you tip the tray out. Here's how it works, in our words:

The two parts connect precisely — you'll hear the click. Water runs off the toys and is looped down by gravity to a second level underneath. That level catches it. You dump it, wipe it with a cloth, done. Nothing pooling under the toys, nothing to scrub the next morning.

There's no sack and no standing water. Toys don't sit in a puddle overnight.

A few other things we got right on purpose:

  • It's round. It fits in a corner without looking boxy.
  • It sits on four rubber pads. It stays put on a wet tub edge. There's nothing to mount and nothing to drill.
  • It doesn't look like a bin. The color fits a bathroom, whether yours is a magazine spread or a rental with a shower curtain. Nobody should have to hide their kid's stuff before guests come over.

It doesn't stick to the wall. It sits wherever you put it.

The honest limit

We'd rather tell you where this stops working than let you find out the hard way. So here it is, with no fine print:

It only fails one way: if the water never gets dumped. And a toy that holds water inside itself will hold it anywhere — we don't claim to fix that one.

The first part is on you, and it's easy. The tray catches the water. It can't empty itself. If the water in the bottom piece sits for days, you've moved the puddle from under the toys to the tray. Dump it.

The second part is about the toy. Some bath toys have a hole and a hollow inside. They take on water when you squeeze them, and they keep it. No basket, bag, bucket, or tray changes that. Drainage handles the water that runs off a toy. It can't reach the water locked inside one.

If you have a toy like that, give it a squeeze before it goes in. Or retire it from bath duty. That one is a toy problem, and we say so.

Your after-bath routine

Here's the whole routine. It takes less time than reading this sentence took you to get through.

  • Toys go in. Drop them into the basket when bath is done.
  • Water drains out. It runs down to the second level. You don't have to do anything.
  • Dump the tray. Do this when it's convenient, and don't let it sit for days.
  • Wipe it with a cloth. Same as any bathroom surface.

That's it. Nothing to wring out and nothing to hang up to dry. The next morning, nothing to scrub.

The Bath Buddy is $39.88. It comes with a rinse cup, and shipping is free in the contiguous US with no minimum order. Toys are not included. You probably have a tub full already.

Here's the short version for the next time someone asks how to stop bath toys getting moldy. Get the water away from the toys. Empty it when the bath is done. That's drainage, and drainage is the whole job.

If something arrives damaged or a part is missing, we replace it free. Email a photo to hello@tiipikids.com. One of us reads every email and answers it. Not a bot.

Back to blog